Energy Saver for Lighting Applications, Lighting Energy Saver, Lighting Energy Saving Devices, Minimize Electric Bill
Energy Saver for Lighting Applications, Lighting Energy Saver, Lighting Energy Saving Devices, Minimize Electric Bill
     
  Energy Saver for Lighting Applications, Lighting Energy Saver, Lighting Energy Saving Devices, Minimize Electric Bill  
     
 
  Micromizer - Energy Saver for Lighting Applications, Lighting Energy Saver, Lighting Energy Saving Devices, Minimize Electric Bill
 
     
     
 

MICROMIZER -  THE ENERGY SAVER FOR LIGHTING APPLICATIONS IN SMALL AND MEDIUM SIZED COMMERCIAL ENTERPRISES

PRODUCT AND TECHNOLOGY
The MICROMIZER is basically a series reactance coil, when installed on discharge lighting feeders, results in substantial energy saving. While there is a NOMINAL impact on the light output, the savings are quite attractive.

Typically, the MICROMIZER would help save atleast 20-25% on the lighting energy bills. Most important to note here is that the device has application in LIGHTING LOADS only and should not be used with air-conditioners.

 
     
 

Other electrical loads like PCs & Fans MAY BE PRESENT in the particular lighting circuit where there would be a saving. However, ideally, the circuit should be a segregated lighting load only.

We are initially introducing 8 models of MICROMIZER in two variants in 2 KVA, 3 KVA, 4.5 KVA and 6 KVA capacities.
All models are for SINGLE PHASE operation only.

The two basic variants will be `INTELLIGENT’ and `MANUAL’ versions. The former has some very useful features like automatic timer with up to 8 different user settable programs, monitoring of load parameters like voltage, current, kVA, kW (Units) etc. and automatic switching between BYPASS mode and SAVING / SUPER SAVING modes depending on the input supply condition of voltage. In addition, an estimation of SAVED UNITS is also a standard feature.

 
     
     
     

  Hosted by : MID Promoted by : GID